GEN_3


GEN_3 is the latest evolution of our GEN_2 concept. Our goal was to add a folding component to our wheelchair, as this was this largest request we received from the field upon seeking feedback from our first two iterations of wheelchairs. We designed GEN_3 to be just as adjustable as the Gen_2, but allow for wheelchair users and family members to fold for easier storage and transport. It allows adjustments to its width, seat length, backrest height and is capable of a large range of footrest positions. We can configure it to give optimum postural support for users with special needs. The rear wheels have been positioned to make movement more efficient thus facilitating travel over long distances.

Manufacturer: Free Wheelchair Mission

Make an inquiry about this product: click here

Website: http://www.freewheelchairmission.org/

Features

  • Solid Seat
  • adjustable back height and seat depth
  • tension adjustable back
  • seat belt
  • hand pump with hand pump clip
  • inner tube patch kits
  • Seat dump is 10˚ by default but can be adjusted to anywhere between 0˚ to 14˚

Key Specs


Seat Width:
12.9 Inch / 32.8 Cm
14.8 Inch / 37.6 Cm
16.3 Inch / 41.4 Cm
18.7 Inch / 47.5 Cm
12.9 - 18.7 Inch / 32.8 - 47.5 Cm
Seat Depth:
11.4 Inch / 29 Cm
14.2 Inch / 36.1 Cm
16.9 Inch / 42.9 Cm
11.4 - 16.9 Inch / 29 - 42.9 Cm
Product Weight:
Rear Wheels:
26 x 2.1 In (66 x 5.4 Cm) Pneumatic
Caster Wheels:
7.9 x 1.6 In (20 x 4.1 Cm) SolidView All Specs

More Info


Intended Users: Children, Teenagers, Adults, Older Adults.

Assembly: Some assembly required
10-20 minutes assembly time
All four sizes come in kits contained in a brown, five-ply cardboard box with black printed graphics. Packaging is not waterproof. Outside dimensions – 690x690x330mm (27.2” x 27.2” x 13”)
Tools and instructions included
440 wheelchairs Shipped in bulk in 40’ high cube ocean freight containers

FDA clearance status:

Other information about the GEN_3: GEN_3 is the latest evolution of our GEN_2 concept. Our goal was to add a folding component to our wheelchair, as this was this largest request we received from the field upon seeking feedback from our first two iterations of wheelchairs. We designed GEN_3 to be just as adjustable as the Gen_2, but allow for wheelchair users and family members to fold for easier storage and transport. It allows adjustments to its width, seat length, backrest height and is capable of a large range of footrest positions. We can configure it to give optimum postural support for users with special needs. The rear wheels have been positioned to make movement more efficient thus facilitating travel over long distances.

Not available in the U.S. Cannot be purchased commercially - must be given by approved in-country distribution partner at no cost to recipient.